Navman SmartS TM - Manual (Page 7)

7
PiN Pocket PC 00 | Quick Start Guide
Q
uick S
ta
rt Guide
Charging the Battery
Your PiN comes with a charged battery. Whenever possible, keep your PiN connected to a power
source. Doing so keeps the battery charged.
The Charge Indicator is amber when the battery is charging. When the battery is fully charged, the
Charge Indicator is green.
From AC Power
1. Slide the plug on to the AC adapter.
2. Connect the USB cable to the bottom of the PiN.
. Connect the AC adapter to the power connector on the USB cable.
4. Plug the other end of the AC adapter into a wall outlet.
Do not disconnect your PiN from AC power until the battery is fully charged. This may take
several hours.
From Vehicle Power
1. Connect the vehicle power adapter to the bottom of the PiN.
2. Plug the other end of the vehicle power adapter into the vehicle lighter socket.