Nokia DNT2Mi-fp - Manual (Page 54)

DNT2Mi-fp Data Network Terminal User manual
54 (60) © Nokia Corporation DN0445814
Nokia Proprietary and Confidential Issue 2-0 en
Figure 28. Settings menu structure (continued)
6,3,9
Line settings:
0 Display
3 Line interface
6 Power backoff
8 BER alarm limit
9 BER alarm severity
6,3
Line interface
SHDSL mode:
1 STU-C (fixed)
2 STU-R (rate adaptive)
6,3,3
6,4
6,7
6,100
6,3,3,1
Line if: STU-C
2/4-wire mode:
2 Two-wire
4 Four-wire
6,3,3,1,4
Line if: STU-C, 4w, psdS
Give line rate
n = 6 .. 32 (even number)
psdS = Power spectral density mask,
Symmetric
32 = Line rate, the value of n x 64k
*) not in T65690.01
6,3,3,2
Line if: STU-R
2/4-wire mode:
2 Two-wire
4 Four-wire
6,3,3,1,2
Line if: STU-C, 2w, psdS
Give line rate
n = 3 .. 32
*)
*)
6,3,3
BER alarm limit:
0 Display
1 E-3
2 E-6
6,3,3
6,3,8
BER alarm severity:
0 Display
1 No alarm
2 A-level alarm
3 B-level alarm
4 AS-level alarm
*)
0 Display
1 On
2 Off
6,3,6
(On)
(STU-R, 2w)
(B-level alarm)
(E-3)
The factory settings are marked within brackets.