NEC 5224 User Manual

Page 27

Advertising
background image

21

To add a call on Hold to an existing conversation or conference:

1. Press the AddHeld softkey.

2. Press the flashing line key.

Swap

To call another party when you are in an established two–party call:

1. Press

( TRANS/CONF ).

2. Dial the number.

To alternate between the two parties:

• Press the Swap/Trade feature key or the Trade softkey.

Call Forward

Call Forward lets you redirect incoming calls to an alternate number.You can select one of the
following forwarding options:

• Always redirects all incoming calls regardless of the state of your telephone.

• B–Int redirects internal calls when your telephone is busy.

• B–Ext redirects external calls when your telephone is busy.

• NA–Int redirects internal calls after several rings if you don't answer.

• NA–Ext redirects external calls after several rings if you don't answer.

Note: For information about "I'm Here?", see Call Forward – Remote.

To program Call Forward:

1. Press

( SUPERKEY ).

2. Press # or the No softkey until "Call Forwarding?" appears.

3. Press * or the Yes softkey .

4. Press # or the Next softkey until the type of Call Forward that you want to set up appears

(see above).

5. On a 5224 IP Phone only, press the Review softkey.

6. If a number is already programmed, press * or the Change softkey .

Advertising