Netopia R910 - Manual (Page 49)

WAN and System Configuration 8-49
See the release notes that came with your router or feature set upgrade, or visit the Netopia Web site at
www.netopia.com for information on new feature sets, how to obtain them, and how to install them on your
Netopia R910.
Logging
You can configure a UNIX-compatible syslog client to repor t a number of subsets of the events entered in the
router’s WAN Event Histor y. See
“WAN Event Histor y” on page 12-113 .The Syslog client (for the PC only) is
supplied as a .ZIP file on the Netopia CustomerCare CD.
Select Logging from the System Configuration menu.
The Logging Configuration screen appears.
By default, all events are logged in the event histor y.
■ By toggling each event descriptor either Yes or No, you can determine which ones are logged and which are
ignored.
■ You can enable or disable the syslog client dynamically. When enabled, it will repor t any appropriate and
previously unrepor ted events.
■ You can specify the syslog ser ver’s address either in dotted decimal format or as a DNS name up to 63
characters.
■ You can specify the UNIX syslog Facility to use by selecting the Facility pop-up.
Logging Configuration
WAN Event Log Options
Log Boot and Errors: Yes
Log Line Specific: Yes
Log Connections: Yes
Log PPP, DHCP, CNA: Yes
Log IP: Yes
Syslog Parameters
Syslog Enabled: No
Hostname or IP Address:
Facility... Local 0
Return/Enter accepts * Tab toggles * ESC cancels.