Assembly – North Star M268175D User Manual

Page 11

Advertising
background image

Assembly

11

Piece of

cardboard

Wheel

Lug bolt

Hub

Shim

Step Five: Attach the wheels.

NOTE: For this step, the engine must be free of oil and gas. The broadcast kit and taillight

kit cannot be in place, if equipped.

IMPORTANT: At least two people should perform this step.
1. Place a piece of cardboard on the ground behind the sprayer. The ground should be a

hard, level surface. Lift the tongue of the sprayer until the unit is resting on end in a
vertical position. It may be necessary to place a shim under the tubes so the sprayer
stands in a vertical position.

2. Fasten the wheels to the hubs with

(10) lug bolts. Tighten to 102 ft-lbs.

3. Lower the front of the trailer sprayer

until the wheels and jack touch the
ground.






Advertising