North Star M268175D - Manual (Page 14)

Operation – Using the Trailer Kit
14
Bridge pin
Jack
Hitch pin
Agricultural style hitch
Step One. Inspect/Repair
If the trailer has been used previously, it must be prepared BEFORE EACH SUBSEQUENT USE.
WARNING
Read instructions below carefully for inspecting and preparing the trailer kit.
Damaged or missing components could result in injury to the operator, bystanders, or property damage.
Important safety rules:
• Replacement parts. If a part needs replacement, only use parts that meet the manufacturer’s
specifications. Replacement parts that do not meet specifications may result in a safety hazard or
poor operation of the trailer kit.
Inspect and repair Inspect and test the trailer kit thoroughly
a. Check tires for proper pressure level.
b. Check to be sure that all nuts and bolts are tight.
Step Two: Tow the trailer sprayer.
1. Review safety
information
Review the “Operation – Important Safety Information” related to
Transportation Safety provided in this manual.
2. Attach to
vehicle
1. Attach trailer sprayer to agricultural style hitch. Secure with the hitch pin and
bridge pin.
2. Retract jack and rotate
into travel position.
Important: When filled, the trailer sprayer has a tongue weight of approximately
400lbs. Ensure that the tow vehicle is properly equipped to handle this load.
3. Transport Tow the trailer sprayer at speeds less than 12mph. If greater speeds are
required, a high-speed coupler with safety chains must be used. Order optional
Item# 268176, which includes a 2” ball coupler, safety chains, and a trailer light kit
designed specifically for this trailer sprayer.
4. Leaving
unattended
If the trailer sprayer must be left unattended at any time:
• Turn off the vehicle. Set brake or block the wheels.