Chapter 3 getting started, For a network with a dhcp server, Chapter 3 – NETGEAR FS526T User Manual
Page 10: Getting started, For a network with a dhcp server -1
Getting Started
3-1
July 2005
Chapter 3
Getting Started
This chapter will walk you through the steps to start managing your switch. This chapter will
cover how to get started in a network with a DHCP server (most common) as well as if you do not
have a DHCP server.
For a Network with a DHCP Server
1.
Connect the Smart Switch to a DHCP network.
2.
Power on the Smart Switch by plugging in power cord.
3.
Install the Smartwizard Discovery program on your computer
4.
Start the Smartwizard Discovery utility. (Chapter 4 has detailed instructions on the
Smartwizard Discovery utility)
5.
Click Discover of the Smartwizard Discovery utility to find your switch. You should see a
something similar to Figure 2-1.
6.
Select your switch by clicking on it. Then click on Web Access, as highlighted in Figure 2-2.
Figure 3-1: Smartwizard Discovery Utility > Discover