NETGEAR FS526T - Manual (Page 22)

Smart Switch Series Software Manual
4-8 Web-Based Management Interface
July 2005
Switch> VLAN> IEEE802.1Q Tag VLAN
Depending on your model switch there are up to 64 static Tag VLAN groups supported on your
switch. The VLAN tagging option is a standard set by the IEEE to facilitate the spanning of
VLANs across multiple switches (Reference: Appendix A and IEEE Std 802.1Q-1998 Virtual
Bridged Local Area Networks).
Click to select IEEE802.1Q VLAN. A screen pops up to confirm this change.
All ports are set belonging to VLAN 1 by default, all untagged.
From the page, you can create a new VLAN, add new ports to an existing VLAN, remove ports
from an existing VLAN or, delete a VLAN.
Add a port to a VLAN Group
• Under the VLAN ID drop down menu, select the VLAN you want to edit.
• Click the box below the port number so that a ‘T’ (tagged) or ‘U’ (untagged) appears.
• Click Apply.
Remove a port from a VLAN Group
• Click the box again until a blank box appears. This will remove VLAN membership from the
port.
• Click Apply.
Note: The default PVID of all ports is 1; therefore, you cannot remove any ports for the default
Tag VLAN. It means that before removing any desired port from default Tag VLAN, changes
PVID of such desired port to the PVID other than 1.
Create a new VLAN Group
• Under the VLAN ID drop down menu, select Add new VLAN.
• Enter the VLAN ID “2” in the provided fields. VLAN ID must be set within 2 ~ 4094.
• Add VLAN members if so desired; click the box below the port number so that a ‘T’ (tagged)
or ‘U’ (untagged) appears.
• Click Apply.