New Media Technology IP Power 9212 - Manual (Page 15)

6. Control and settings through the Internet
Type the new IP address of IP Power 9212 in the address field and you can enter the login web page. Input
the default password 12345678(you can change the password as you wish), click the OK and then you can
enter the Web Control page.
1)Maximum 8 digit for Password
Sensor of IP Power 9212 : Read IO
Source mode ( Voltage input) :
IN1-IN4 contacts are active signal sensor. If the voltage difference between the two contacts in one set
within 0V~3V, 9212 shows ON. It the voltage difference within 4V~24V, 9212 shows OFF. So user can
detect the change of equipment. Such as smoke detector, light detector and gas detector.
Sink mode (Resistance Input ) :
- 14 -