New Media Technology IP Power 9212 User Manual
Page 26
IP POWER 9212 USER MANUAL
9. FAQ
Q1: I forgot the password and can not enter the administration page now, what can I do?
A1: Turn on the power normally, and then click the ipedit.exe program to enter the web page. Type in the
username “superuser” and press ok then press the reset button in 9200; it will back to the default settings.
Now you can enter the administration page.
Q2: I cannot open the IE web page, why?
A2: Please update your IE or use the up-to-date version of Netscape browser.
Q3: Why the on/off operation can work immediately?
A3: if you operate the IP Sensor 9201 in Ethernet, the operation will work immediately. If you operate it
through the Internet, the response speed depends on the situation of the network. Normally the delay is not
obvious because the date need to be transported during operating the IP Sensor 9201 is very little.
VER. X.X,
- 25 -