Neuros Audio MPEG-4 - Manual (Page 50)

46
4. Scroll to the Setup mode by pressing right arrows on the
remote, then select the Setup mode by pressing the button.
The Setup options should now be displayed.
5. Scroll through the Setup menu to highlight the Firmware
Upgrade option, then press the button to start the firmware
upgrade.
A "Clock" icon will appear on the screen while the firmware is
being upgraded. The clock icon will disappear and the Recorder 2
will turn off automatically, when the upgrade is complete.
6. Press the "Power" button on the remote controller to turn on the
Recorder 2.
7. Check out the firmware version at the bottom of the Setup
menu (as described above) to confirm that the new version is now
loaded.
8. Use the arrow to scroll to highlight the Factory Reset option.
9. Press the button on the remote to do reset the system.
10. You're done. Enjoy your new firmware
MPEG-4 Video Recorder_UM_EN.book Page 46 Monday, June 19, 2006 8:22 PM