NEC colour monitor - Manual (Page 14)

Appendix
Español
Français
Deutsch
English
Italiano
E - 14 Controls
Controls
BNC/D-SUB:Allows you to change between the BNC and D-SUB signal
inputs.
OSM Controls
The OSM controls on the front of the monitor provide the following
functions:
To access OSM press any of the control buttons ( , , , ) or the PROCEED or
EXIT button.
To rotate OSM between Landscape and Portrait modes, press the RESET button.
NOTE: OSM menu must be closed in order to rotate.
Main Menu Sub-Menu
EXIT Exits the OSM controls. Exits to the OSM main
menu.
CONTROL / Moves the highlighted Moves the highlighted
area up/down to select area up/down to select
one of the controls one of the controls
CONTROL / Moves the highlighted area Moves the bar left /
left / rights to select right to increase or
control menus. decrease the adjustment.
PROCEED Has no function. Activates Auto Adjust
and ALL
RESET functions.
RESET Resets the highlighted Resets the highlighted
contol menu to the factory contol to the factory
setting. setting.
NOTE: When RESET is pressed in the main and sub-menu, a warning window will
appear allowing you to cancel the RESET function by pressing the EXIT button.
OSM
78134811.PM5 99.12.24, 2:19 PM 24