NEC colour monitor - Manual (Page 5)

Appendix
Español
Français
Deutsch
English
Italiano
Recommended Use
For optimum performance, please note the following when setting up
and using the MultiSync LCD
2110 colour monitor:
• DO NOT OPEN THE MONITOR. There are no user
serviceable parts inside and opening or removing covers may
expose you to dangerous shock hazards or other risks. Refer
all servicing to qualified service personnel.
• The optimum monitor position is facing away from direct
sunlight.
•
Allow adequate ventilation around the monitor so that heat can
properly dissipate. Do not block ventilated openings or place
the monitor near a radiator or other heat sources. Do not put
anything on top of monitor.
•
Do not spill any liquids into the cabinet or use your monitor
near water.
•
Do not insert objects of any kind into the cabinet slots, as they
may touch dangerous voltage points, which can be harmful or
fatal or may cause electric shock, fire or equipment failure.
•
Do not place any heavy objects on the power cord. Damage to
the cord may cause shock or fire.
• Do not place this product on a sloping or unstable cart, stand or table,
as the monitor may fall, causing serious damage to the monitor.
• Use the monitor in a clean and dry area.
•
Handle with care when transporting. Save packaging for
transporting.
• The power cable connector is the primary means of detaching
the system from the power supply. The monitor should be
installed close to a power outlet which is easily accessible.
• Use supplied AC Adapter.
•
The inside of the fluorescent tube located within the LCD
monitor contains mercury. Please follow the bylaws or rules of
your local municipality to dispose of this tube property.
•
Clean the LCD monitor surface with a lint-free, non-abrasive cloth.
Avoid using any cleaning solution, glass cleaner or tissue paper.
Recommended Use E - 5
78134811.PM5 99.12.24, 2:19 PM 15