NETGEAR 108 Mbps Wireless PCI Adapter WG311T - Manual

)NSTALLATION
NETGEAR 108 Mbps Wireless PCI Adapter WG311T
These setup instructions assume that you will connect to an access point or wireless router.
Estimated Completion 15-25 minutes.
Installation
1. First, install the WG311T
software.
Insert the NETGEAR CD. If the CD main
page does not appear, double click
Autorun.exe on the CD.
a. Click Install the Software. The Check
for Updates window opens.
b. If you are connected to the Internet, click
Check for Updates. If not, you can
choose to install from the CD.
c. Follow the Wizard steps and click Next to continue.
2. Now, install the wireless PCI
adapter.
a. When prompted, shut down the
computer.
b. Unplug the computer, open the case,
and install the WG311T into a PCI
slot.
c. Connect the antenna to the adapter and
position the antenna to the up position.
d. Close the case, plug the power cord back in, and restart your computer.
e. You will be prompted to select the country where you are located.
f. Select the country and click Agree.
3. Use the Smart Wizard to set up your wireless PCI adapter.
a. Windows 2000 users go to Step b.
Windows XP or Vista users can set up the
wireless adapter either with the
NETGEAR Smart Wizard (recommended)
or the Windows Configuration Utilities.
• NETGEAR Smart Wizard: Reveals
more information about each network
and makes it easier to troubleshoot
network connection problems.
• Windows Configuration Utilities: See the Windows documentation or
“Using Windows XP and Vista Wireless Configuration Utilities” at:
http://documentation.netgear.com/reference/enu/winzerocfg/index.htm
b. Click Next to accept the NETGEAR
Smart Wizard.
You will be prompted to let the
wizard help you connect to a network
(recommended).
c. Click Next to accept.
4. Connect to a wireless network.
a. Select the wireless network from the
drop-down list, and the wizard records
your choice.
Note: Hidden networks do not broadcast
the Network Name (SSID). These
networks are in the drop-down list,
but the Network Name (SSID) is
blank.
If the network uses security, then the
Smart Wizard detects it.
b. Follow the Wizard steps for Security (if used) and for saving a Profile.
c. After you have reviewed the settings, click Finish.
The WG311T icon appears in the system tray and on the desktop; and the
Settings page opens. The wizard initiates your wireless connection. It could take up to
a minute for your wireless connection to be established. Check the status bar.
Using the Status Bar
The status bar is located at the bottom of the Settings page.
• Connection Status: The color shows the connection status.
• Signal Strength: Shows the signal strength of the wireless network. If the signal is
poor, try moving closer to the wireless access point.
• Lock icon: Shows if security is used on the network.
• Internet/Router connection: Shows the progress of your connection.
Connection Indicator Description
Connected to Internet Wireless Internet connection OK.
Connected to Router
Wireless connection to router OK but no Internet
connection at router.
___.___.___.___ or
169.254..x.x
Wireless connection to a router OK but problem with
the router. See the online help or User Manual for
troubleshooting tips.
connection
status
Internet/router unlocked: network
signal strength
indicator
connection indicator does not use security connection wizard