NAD 2700 - Manual (Page 2)

POWER AMP SECTION
Continuous output power into 8
Ω * 150W (21.7dBW)
Rated distortion
(THD 20Hz - 20kHz)
0.03%
Clipping power (maximum continuous power per channel) 200W
IHF Dynamic headroom at 8 Ω +4.3dB
IHF dynamic power
(maximum short term power per channel)
8
Ω
400W (26 dBW)
4
Ω
600W (28 dBW)
2
Ω
800W (29 dBW)
Damping factor (ref. 8 Ω , 50Hz) >120
Input impedance 20k Ω / 820pF
Input sensitivity
(for rated power into 8 Ω )
1.2V
Frequency response 1Hz - 80kHz / (+0, -3dB) THX
Signal/noise ratio ref. 1W 100 dB
ref. rated power 122 dB
THD (20Hz - 20kHz) <0.03%
Bridged Mode
Continuous output power into 8
Ω
* 400W (26 dBW)
IHF Dynamic headroom at 8
Ω
+5dB
IHF dynamic power (maximum short term power per channel) 8
Ω
1.2 kW (31 dBW)
4 Ω 1.6 kW (32 dBW)
PHYSICAL SPECIFICATIONS
Dimensions
(W x H x D) 435 x 127 x 395mm
Net weight 13 kg
Shipping weight 14.3 kg
Power consumption (120 ~ 240V, 50/60Hz) 970VA
* Minimum power per chnnel, 20Hz - 20kHz, both channels driven with no more than rated distortion.
Dimensions are of unit’s cabinet without attached feet; add up to 18mm for total height.
Dimension depth excludes terminals, sockets, controls and buttons.
© NAD Electronics. All rights reserved. E & OE