NETGEAR EVA8000 - Manual (Page 79)

6-7
To go to the Media library management screen, press Home, and
select More > Supervisor Functions > Advanced Settings > Media library
management. The Media library management screen offers these options:
• Data save location. Specify where your backup library should be
saved.
• Load library. Load the media library.
• Save library. Save the media library to a new location, either on your
network or on an external device. This creates a backup library.
• Auto load on power-up. If this option is on, the Digital Entertainer
HD loads the backup library following a power failure.
• Auto save after scan. Immediately after new files are scanned, the
backup library is updated to the version on the Digital Entertainer
HD.
• Daily auto-scan. Set the Digital Entertainer HD to scan your files
every day at the specified time, or you can disable this option.
• Show file details. This option is for use in detecting invalid files and
should be left off unless you are instructed to use it by NETGEAR
support personnel.
More... Settings
The following settings are available in the More screen:
• Quick scan for media files. Look for new media files and add them
to the media library.
Warning: This option requires your computer to be on and
the shared files available at the specified time. If
your computer is in sleep, standby, or any mode
other than on, the scan will find no shared files,
and your library will contain no media.
To avoid this, you can disable Daily auto-scan, or
leave the computer on, or enable the computer
Wake on LAN feature so that your computer is
activated by the scan.