Nielsen-Kellerman ClearNav - Manual (Page 68)

NK ClearNav Manual • Version 0.5 • July 3, 2008
Page 68 of 86
To change the data displayed in the Altitude Window or to access the Alt. Tab or Set MSL Tab:
Press the Focus button once or twice until the Numeric Information Area at the bottom of
the screen is in focus (not the Selection Box).
Press the Left and Right buttons to put the focus on the Altitude Window.
Press the Up , Down or Select button and the Alt. Tab or Set MSL Tab will appear.
or
Use the Up and Down buttons to move through the display options in the Alt. Tab.
Use the Left and Right buttons to switch between the Alt. and Set MSL tabs.
Press the Select button to activate the selected function or edit the highlighted numeric data.
Press the Menu , Focus or button to return to the moving map.
4.2.4 The Selection Box
or
The Selection Box is displayed in the center of the map display. It is used to:
• Pan the moving map display with the Up , Down , Left and Right buttons
• Select a turnpoint so that you can view details on it or start navigating to it (Goto) or add it to
the active task
• Select an airspace and view details on it or turn it off for 12 hours
• The distance number in the bottom right corner of the box indicates the width of the entire
map screen (not the width of the box)