Nielsen-Kellerman ClearNav - Manual (Page 83)

NK ClearNav Manual • Version 0.5 • July 3, 2008
Page 83 of 86
5.3.3 Transferring Firmware Files from the USB Flash Drive to the ClearNav
Transferring the firmware and software files from the USB Flash Drive to the ClearNav is very easy.
1. Power‐down the ClearNav
2. Plug the USB Flash Drive into the ClearNav’s panel mounted USB connector
3. Power‐up the ClearNav. The ClearNav automatically transfers the files from the USB Flash Drive
to the ClearNav’s internal memory.