NEC 5330 IP User Manual

Page 65

Advertising
background image

5330/5340 IP Phones – User Guide

65

3.

Press the Read Message softkey, and do one or all of the following:

•

To display the time the message was sent, press the More Msg softkey.

•

To display the number of the caller, press the More Msg softkey twice.

•

To call the message sender, press the Call softkey.

•

To delete the message, press the Erase Msg softkey.

•

To view the next message, press

(MESSAGE).

You can check for messages from a remote station:

1.

Press Superkey (must be programmed to a key).

2.

Press the No softkey until "Remote Msging?" appears.

3.

Press the Yes softkey.

4.

Dial your extension number.

5.

Press the Enter softkey.

6.

If a password is required, enter your password and press the Enter softkey.

7.

Press the Yes softkey.

You can set, change, or clear a password (up to 7 digits, not including 0):

1.

Press Superkey (must be programmed to a key).

2.

Press the No softkey until "Set Password?" appears.

3.

Press the Yes softkey.

4.

Do one of the following:

•

To enter a new password, enter your password.

•

To change or clear your password, enter your current password.

5.

Press the Enter softkey.

6.

To change or clear your password, do one of the following:

•

To change your password, enter your new password and press the Enter softkey.

•

To clear your password, enter 0.

7.

Enter your new password again.

8.

If you are setting up or changing a password, press the Enter softkey.

9.

Press Superkey (must be programmed to a key).

Advertising