Navigon 13xx - Manual (Page 40)

User’s manual NAVIGON 13xx | 23xx
Navigation - 40 -
The R
OUTE P LANNING
window opens. The starting point and the
route points of the loaded route have been entered.
5.4.5 Calculating and displaying routes
It is possible to calculate and display a planned route on the map even
without GPS reception in order to get an impression of the journey.
The R
OUTE P LANNING
window is open. The starting point and at least
one route point have been entered.
►
Tap on Show Route.
The map opens in Preview mode.
The starting point and the route points are marked by flags. The
distance and the estimated trip time is given for each leg of the
route.
5.4.6 Simulating routes
It is also possible simply to simulate navigation on a planned route.
Note:
GPS reception is not necessary for simulation.
If you have planned a multi-leg route, only the first leg will be simulated.
You have calculated and displayed a route.
1. Tap
on Options > Simulation.
The route will be recalculated for simulation purposes.
If you have planned a route with only one route point and the
MyRoutes
function is activated, you will be prompted to select a
route for the simulation.
2. Tap on the button of the route on which you want to simulate the
navigation.
Note: When the MyRoutes function is deactivated or if you have
planned a route with more than one route point, the simulation will start
directly after the route has been calculated.
For more details about the MyRoutes function refer to the chapter
"MyRoutes" on page 35.
Stopping simulation
You can stop simulation at any time.
►
Tap on (Back).