3 notes on use, 4 cleaning the unit, Notes on use – Nikon 35mm User Manual

Page 17: Cleaning the unit

Advertising
background image

- 17 -

2.3

Notes on Use

• Don’t use a slide mount neither less than 1.1mm nor more

than 3.0mm thick. If the slide mount is not flat on its surface,
you may feel some roughness when mounting or
unmounting the slide.

• Don’t force the slide-mount or strip film holder into or out

of the unit if it does not move smoothly.

• When scanning film, don’t touch or unmount the slide-

mount or film strip holder.

2.4

Cleaning the Unit

When carrying out routine maintenance and cleaning, ensure
that no volatile liquids such as alcohol, benzine, or thinner come
into contact with the COOLSCAN II as this may cause a failure,
fire, or electric shock.

Please observe the following points:

• Before cleaning, always turn the power off, and pull out the

power plug.

• Since the front cover is made from plastic material, remove

dust with a blower or a dry cloth.

Use a soft, dry cloth to remove dust from the metal panel at
the rear.

• If the unit has become badly soiled, clean with a cloth

moistened with a mild liquid detergent, then dry with a soft
cloth.

Avoid harsh substances such as alcohol, benzine, thinner, or
pesticides, as they may damage the surface, or remove the
exterior finish.

Advertising
This manual is related to the following products: