Nikon 35mm - Manual (Page 22)

- 22 -
4.2 Connecting the Power Cord
Before connecting the power cord, confirm that the unit’s
power switch is in the off position.
Insert the female end of the supplied power cord into the AC
inlet located on the rear panel, then insert the plug into the AC
power outlet.
5
Remarks
• The power source must be grounded.
• If possible, try to use an independent electric outlet. If the
unit is connected to an outlet to which an electric household
appliance, such as a vacuum cleaner or air-conditioner, is
connected, the product may experience power source noise
interference.
• Do not extend the power cord of the product, as this may
cause malfunction.
* The shape of the plug depends
on the country of use.
* The shape of the plug depends
on the country of use.