Rs232 connection, Rear view of unimux-dvi-16hd, Nti unimux series usb kvm switch 8 – Network Technologies 2907 User Manual
Page 12: Figure 7- connect rs232 control terminal, Control terminal
NTI UNIMUX SERIES USB KVM SWITCH
8
RS232 Connection
If the RS232 is going to be used, connect one end of the CAT5 patch cable (supplied) to the port labeled “RS232” on the rear of
the UNIMUX. Plug the other end of the CAT5 cable into either the RJ45-to-DB9 or RJ45-to-DB25 adapter supplied, and connect
the adapter to the RS232 port on the control terminal. Follow the instruction under “RS232 Control” on page 13 for configuration
and use of the RS232 control feature.
Figure 7- Connect RS232 control terminal
VGA
Multi-Scan
Monitor
Control Terminal
RJ45-to-DB9 Adapter
(supplied)
CAT5 Patch Cable
(supplied)
RJ45-to-DB25 Adapter
(supplied)
or
Rear View of UNIMUX-DVI-16HD
CPU 1
CPU 2
CPU 3
CPU 4
CPU 5
CPU 6
CPU 7
CPU 8
CPU 9
CPU 10
CPU 11
CPU 12
CPU 13
CPU 14
CPU 15
CPU 16
RS232
250V,2A
MONITOR
NTI
Tel:330-562-7070
Fax:330-562-1999
1275 Danner Dr
Aurora, OH 44202
www.networktechinc.com
R
DDC
1
8
ON
RS232