Eizo DURAVISION FDS1901 - Manual (Page 13)

11
Chapter 1 Introduction
1-3. Controls and Functions
Monitor
14
15
7 3 6 2 4
9 10 12 11
5 1
8
13
1 Remote control detector Receives the signal from the remote control.
2
button Displays the volume adjustment menu to volume up or down.
3 button
• Displays/Exits the OSD menu.
• Pressing the button while the OSD menu is displayed returns you to the
previous menu status.
4 button
• Used to: select the OSD menu tab; select the set value; or to increase/
decrease the adjustment value.
• Press twice to switch the input signals.
5 button
• Displays the Quick-OSD menu.
• Used to select the setting or adjustment items in each menu.
6 button Turns the power on or off.
7 Power indicator
Indicates monitor’s operation status.
Blue : Operating
Orange : Standby mode
8 Speaker Outputs audio source.
9 Power connector Connects the power cord.
10 Input signal connector D-Sub mini 15-pin connector
11 Input signal connector BNC connector
12 Input signal connector Pin jack (L, R)
13 Stand *1 Used to adjust the hight and angle of the monitor screen.
14 Security lock slot Complies with Kensington’s MicroSaver security system.
15 Cable holder Covers the monitor cables.
*1 An optional arm (or an optional stand) can be attached by removing the stand (see “5-1. How to Attach the Optional Arm” (page 22)).