Eizo DURAVISION FDS1901 - Manual (Page 14)

12
Chapter 1 Introduction
Remote Control
1
2
3
8
4
6
5
7
1 POWER Turns the power on or off.
2 INPUT
SELECT
PC Switches to PC input.
VIDEO Switches to video input.
3 VOLUME
Displays the volume adjustment menu to volume up or
down.
4 MENU
• Displays/Exits the OSD menu.
• Pressing the button while the OSD menu is
displayed returns you to the previous menu status.
5 RETURN
Pressing the button while the menu is displayed
returns you to the previous menu status.
6 ∧ / ∨ / ＜ / ＞
• Used to: select the OSD menu tab; select the set
value; or to increase/decrease the adjustment value.
• Pressing or while the OSD menu is not
displayed allows you to adjust the brightness of the
backlight.
7 ENTER
Used to fix the setting or adjustment items in each
menu.
8 MODE Switches the gamma setting.
Before Using Remote Control
●
How to install batteries
1
While pushing the tab toward the arrow (1), pull
out the battery case (2).
(1)
(2)
2
Insert a battery with the positive side up.
(Battery model number: CR2032)
3
Insert the battery case until it clicks.
●
Receivable Range of Remote Control
Use the remote control inside of the range as below.
5m
5m
30°
30°
7m
5m
30°
30°
7m
5m