Navigon Sync 5100max User Manual
Page 2
NAVIGON Sync Quick Start Guide
Downloading NAVIGON Sync
The NAVIGON Sync application is approximately 1.5 MB so it should download in seconds using a
high-speed Internet connection.
1)
NAVIGON Sync is available at the NAVIGON US website. Go to
http://www.navigonusa.com/sync
and follow instructions to begin the download.
2)
When prompted, save the downloaded file to your computer’s desktop or another desired
location
Unzipping and installing NAVIGON Sync
1)
The NAVIGON Sync update is delivered as a ZIP file and needs to be unzipped in order to install.
Double-click the ZIP file to unzip the archive. If you do not have a utility to unzip the file, you
can obtain one at
http://www.winzip.com/index.htm
.
2)
You should have a Setup_Sync.exe file on your desktop (or wherever you saved it). Double-click
the Setup_Sync.exe file and the NAVIGON Sync application will be installed on your PC.
Executing NAVIGON Sync
To run NAVIGON Sync, click the Windows Start button, click All Programs, click NAVIGON Sync.
Copying Outlook contacts to your Navigon PND
1)
From the file menu select the Contacts folder option.
2)
A “Settings” window will pop-up and it will take a few moments for the NAVIGON Sync app to
find all the Contact folders on your PC. Highlight the folder in which your contacts are stored
(the typical names for this folder will be “Contacts” under the Mailbox folder or “Contacts”
under the “Personal Folders”) and click OK.
3)
Click the Read from Outlook button at the top left of the application and wait for the contacts to
be extracted from Outlook and displayed in the lefthand pane of the NAVIGON Sync application.
4)
By default, all your contacts are highlighted for copying. You can deselect any contacts you do
not wish to copy to your PND. Once you are happy with your selection, click the Black arrow
button between the two panes in the NAVIGON Sync application to prepare the selected
contacts for downloading to your Navigon PND.
5)
Power on your Navigon PND and connect it to your computer using the USB card. You will need
to wait for a minute for the PND to restart in mass storage mode. Your Navigon PND is ready