Nady Systems MXE-1212 - Manual (Page 4)

F E AT U R E S
4
The MXE-1212 is a compact, versatile console or rackmountable mixer with 16 built-in selectable DSP echo and reverb
effects that is ideal for many small venue, live sound reinforcement applications
• Superb performance with low noise and smooth, transpar-
ent audio across the full audio spectrum and natural sound-
ing selectable echo/reverb effects
• 4 mono balanced XLR mic and balanced 1/4” line and 8
stereo unbalanced 1/4” inputs (12 total)
• Balanced XLR and unbalanced 1/4”TRS Stereo Outputs
• 3 band EQ for all input channels, 7 band stereo graphic EQ
for Master Mix
• Aux Send and Aux Return with Aux Send and Aux Return
controls
• Four 1/4” TRS inserts allow independent connection of
effects devices for each mono channel
• 60 mm faders on all channels and master L/R and Effect
bus mixes for precise level control
• High quality sealed pots with center detents
• Input Trim controls on all channel inputs with switchable
20dB pad
• Peak LEDs on all input channels
• Pan pots on each mono channel and Balance pots on each
stereo input
• Tape In and Record Out RCA jacks with Tape level control
• Built-in DSP (Digital Sound Processor) for ECHO
(REVERB) with 16 selectable preset level and echo inter-
vals and separate Repeat control, Effects Return and both
individual channel and master mix Effects Send controls,
master Effects fader, separate effects PFL monitoring, and
numeric LED display
• Headphone output with separate volume adjust
• PFL control for each channel allows headphone monitoring
independent of channel volume
• Switchable +48V phantom power on mono channels
• Super accurate 10-segment LED display bargraph meters
• Erasable area above all faders for notations
• Internal AC supply with 115/230V select switch
• Road-tough all steel construction. Rack ears supplied.
• Dimensions & Weight: 16”x17”x 3.5” (406 x 432 x 89 mm),
14.7 lbs (6.7 Kg)