Nady Systems SMA-2130 User Manual

Page 4

Advertising
background image

I N S TA L L AT I O N

4

To ensure years of enjoyment from your NADY AUDIO SMA-2130, please read and understand this manual thoroughly before
using the unit.

INSPECTION

Your NADY AUDIO SMA-2130 was carefully packed at the factory in packaging designed to protect the units in shipment.
Before installing and using your unit, carefully examine the packaging and all contents for any signs of physical damage
that may have occurred in transit.

[Please note: Nady Systems is not responsible for shipping damage. If your unit is damaged, do not return to Nady, but
notify your dealer and the shipping company (if shipped to you) immediately to make a claim. Such claims must be made
by the consignee in a timely manner.]

CONTENTS

• Instruction manual
• SMA-2130 (verify that the unit’s serial number is same as shown on shipping carton)
• AC Power cord
• Warranty Card

RACK MOUNTING

The SMA-2130 fits into one standard 19” rack unit of space (1 3/4”). Parts of the unit can become very warm during use.
This is normal during operation. Care should be taken to ensure that there is enough space around the unit for cooling (at
least 12” or 30cm). Do not place the SMA-2130 on high temperature devices such as power amplifiers, etc., or the unit
may overheat in operation. Also, do not place the unit on speakers as this may cause them to move and/or fall due to
speaker vibrations.

Although the unit’s chassis is shielded against radio frequency (RF) and electromagnetic interference (EMI), extremely
high fields of RF and EMI should be avoided.

POWER CONNECTION

The SMA-2130 has an internal power supply and is designed to operate from an external AC source. Power requirements
for electrical equipment differ from area to area. Be sure to confirm that the voltage selected by the voltage selector switch
on the back panel is proper for your area (120VAC/60 Hz or 230VAC/50Hz) per the information below:

Europe (except UK): 230V, 50Hz

UK and Australia: 240V, 50Hz

USA and Canada: 120V, 60 Hz

For other areas, please check with local authorities.When ready to operate, plug the AC cord into the power source. Make
sure that the unit is turned off before connecting to the AC power source to avoid possible loud transients that can
damage your speakers or your ears, especially when monitoring with headphones.

NOTICE

The information in this document is subject to change, as the Company may make changes to product in order to improve
reliability, design, or function, without prior written notice. No part of this manual may be reproduced or transmitted in any form
or by any means without the written permission of the company.

IN NO EVENT WILL THE COMPANY BE LIABLE FOR SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES,
WHETHER ARISING DIRECTLY OR INDIRECTLY, SUCH AS LOSS OF PROFIT OR GOOD WILL, THAT MAY BE
SUFFERED IN CONNECTION WITH THE PURCHASE OF THIS PRODUCT OR FROM THE BREACH OF ANY
REPRESENTATION OR WARRANTY.

LICENSE

The Company grants the customer a non-exclusive, non-transferable license to use the software, if any, accompanying this
product for internal use on a single computer system. The end user may make a single copy of the software solely for backup
purposes; otherwise, no copies may be made of the software or any part thereof. No other license of any kind is granted to
any part of the product or any of the intellectual property therein.

L E G A L I N F O R M AT I O N

Advertising