Power specifications, Electrical specifications general specifications – Nady Systems SMA-2130 User Manual

Page 7

Advertising
background image

7

S P E C I F I C AT I O N S

EIA Output Power RMS

8

70W + 70W

1kHz, THD maximum 1%

4

130W + 130W

8

Bridged 220W

Less than 8

Bridged or 4

Per Side is not recommended.

POWER SPECIFICATIONS

INPUT SENSITIVITY ..............................................................0.77V/26dB/1.4V

INPUT IMPEDANCE ..............................................................20K

Unbalanced & Balanced

FREQUENCY RESPONSE ....................................................10Hz~50KHz +/-3dB

MAXIMUM INPUT LEVEL........................................................21dB/6V

DAMPING FACTOR (f=1KHz 8

) ..........................................>150

SLEW RATE ............................................................................35V/uS

DISTORTION ..........................................................................<0.04%

S/N RATIO A-Weighted RMS..................................................>80dB

POWER SUPPLY ....................................................................Voltage selectable 110-120V or 220~240V AC 50/60Hz

FUSES ....................................................................................Standard IEC receptacle with built-in fuse holder

115VAC ~ 5A/250V

230VAC ~ 3A/250V

ELECTRICAL SPECIFICATIONS

GENERAL SPECIFICATIONS

PROTECTION ..........................................................................Full short circuit, current limited, DC fault, AC line fuse, thermal, Power on/off transients,

FRONT PANEL ........................................................................Power switch, Channel 1 and Channel 2 Level controls

REAR PANEL ..........................................................................Stereo/Bridge/Parallel selector, Input Level selector,

LED INDICATORS ..................................................................Channel 1 and Channel 2 Clipping, Protect, Bridge, Parallel, Power

POWER ....................................................................................IEC power cord jack

INPUTS ....................................................................................Active balanced XLR and 1/4" (6.3mm) TRS

OUTPUTS ................................................................................Binding posts/Banana jack, Speakon

DIMENSIONS (WXDXH) ..........................................................19" x 9.84" x 1.73" (483 x 250 x 44mm)

WEIGHT ..................................................................................18.25lbs. (8.28Kg)

The specifications above are correct at the time of printing of this manual. For improvement purposes, all specifications for this unit, including design

and appearance, are subject to change without prior notice.

Advertising