Network Technologies NTI Primux Primus-16X64 User Manual
Page 7
7
Make a Connection
From the Command Mode menu, to make connection to any Host Adapter,
press <
Up arrow> or <Down arrow> to highlight and select the desired Host Adapter,
press <
Enter> to connect to it.
-OR-
use the mouse to highlight the desired Host Adapter to connect to and left-click on it to connect.
Press <
Esc> to exit Command Mode and use the connected CPU.
Press <
Ctrl> + <`> to return to the Command Mode OSD menu.
Congratulations, you have successfully installed your PRIMUX Matrix Switch
.
Host Adapter Ordering Chart
NTI #
Application
HA-UNV PS2/USB
CPU
HA-SUN-MTX
Legacy SUN CPU
HA-RS-M Serial-Controlled
Devices
To order CAT5/5e/6 cables, Host Adapters, or User Stations either visit our website at
www.networktechinc.com
or call us at 1-800-RGB-
TECH (800-742-8324) or 1-330-562-7070.
Please Note:
The PRIMUX User Station and Host Adapters used in conjunction with the PRIMUX Matrix Switch must all be
running firmware version 2.0 or later in order to be compatible with the PRIMUX Matrix Switch. For updated firmware with
instruction for upgrading, go to
http://www.networktechinc.com/download/d-kvmswitch-cat5.html
.
MAN106 Rev 6/17/2010