Nikon Coolpix L100 - Manual (Page 62)

50
Hi
gh S
en
siti
vit
y M
o
de
High Sensitivity Mode
Shooting in the High Sensitivity Mode
In high sensitivity mode, ISO sensitivity is set high to reduce blurring caused by
camera shake or subject movement even when shooting under low lighting or
with zoom applied. This allows you to capture the atmosphere of the scene
without flash, or extend the effective range of the flash compared to other
shooting modes (
A 31).
• Image mode can be set to M Normal (2048) or smaller.
1
Enter shooting-mode selection
menu by pressing A in shooting
mode. Use the multi selector H or
I to select the third icon from the
top, and then press K.
2
Press the multi selector J or K to choose B
and press k.
The camera enters B high sensitivity mode.
3
Frame the subject and shoot.
• Raise the built-in flash when using the flash.
• When the camera recognizes a human face
(front view), that face will be framed by a
yellow double border.
Up to 12 faces can be recognized. If more
than one face is recognized, the face
nearest to the camera will be framed by a double border and the rest by a single
border.
• When shooting non-human subjects or when no faces are recognized, focus will be in
the center of the monitor. Position the main subject near the center of the focus area.
Sport continuous
High sensitivity
55 55 55