Rear view of unimux-dvi-16hd, Nti unimux series usb kvm switch 7, Figure 5- connect each cpu – Network Technologies UNIMUX-DVI-xHD User Manual

Page 10: Figure 6- connect the power cord, Power cord iec connector

Advertising

NTI UNIMUX SERIES USB KVM SWITCH

5. Connect each CPU to the USB switch using a USB-DHEXT-xx-MM (xx=3, 6, 10, or 15 foot) cable for each video and input
device connection – REQUIRED (not supplied). (See Fig. 5 below.) Cables are available from NTI.

Figure 5- Connect each CPU

7. Connect the AC power cord with IEC connector to the UNIMUX. (See Fig. 6 below.)

Figure 6- Connect the power cord

USB Type A Female

USB Type A Male

DVI Female
Video Connector

Rear View of Windows USB CPU

Video Port

Input Device Port

HDMI Type A

Video Connector

Mating Face of

DVI Male

Mating Face of

HDMI Type A Male

Rear View of UNIMUX-DVI-16HD

CPU 1

CPU 2

CPU 3

CPU 4

CPU 5

CPU 6

CPU 7

CPU 8

CPU 9

CPU 10

CPU 11

CPU 12

CPU 13

CPU 14

CPU 15

CPU 16

RS232

250V,2A

MONITOR

NTI

Tel:330-562-7070
Fax:330-562-1999

1275 Danner Dr
Aurora, OH 44202

www.networktechinc.com

USB-DHEXT-xx-MM

(3,6,10 and 15 foot cables available)