Nortel Networks C3050 REV2 - Manual (Page 25)

22
5. The display shows Dialcodes?
Note: Dialcodes? is only displayed after you first store the
message service code. If you erase your message service code, you
will have to go through dial codes again and change as required.
Hint: For most Meridian Voice Mail systems, select DEFAULT. For
Norstar Companion systems that support integrated voice mail, select
NO. On some Norstar Companion systems, message service may work
differently, see your system contact for assistance.
6. Press EDIT to change the default dial codes. Press
DEFAULT when you do not want to change the dial codes.
Press NO when you are not using dial codes.
7. Go through the dial codes and change the values for
your voice mail system, if required.
87251304.030 Page 22 Thursday, July 23, 1998 16:09