Introduction, Materials – Network Technologies ST-C5VA-WL500 User Manual

Page 4

Advertising
background image

NTI XTENDEX Wall Mount Extenders

1

INTRODUCTION


The XTENDEX Series Wall Mount VGA Video and Stereo Audio Extender (XTENDEX) is designed to enable the VGA video and
stereo audio signals from one CPU to be viewed and heard by two users, one local and one remote. The remote user can be
located as much as 500 feet away via Category 5 unshielded twisted-pair cable. The local user will be located near the CPU.

The XTENDEX Series Wall Mount VGA Video and Stereo Audio Extender is extremely simple to install and has been thoroughly
tested to insure reliable performance. Through the use of Category 5 cable it is possible to economically increase the flexibility of
a computer system. Here are some of the features and ways this can benefit any workplace:

• Allows the placement of computer monitor and speakers in a location where only these parts are needed without having

the CPU there too, taking up valuable space

• Allows a CPU video and audio signal to be accessed by both a local and remote user (up to 500 feet away)

• Compatible with VGA, SVGA, and XGA systems

• Provides crisp and clear resolution up to 1024 x 768 @ 500 feet (see page 8 for more details)

• Compatible with all NTI switches and splitters, enabling the joining of products to create a system that

satisfies all networking needs

• Video quality adjustment, for varying lengths of cable, is automatic providing optimum image quality

• Digital transmission of audio signals reduces any loss in quality




MATERIALS


Materials Included with this kit:

9 NTI XTENDEX ST-C5VA-WL500 Local Unit
9 NTI XTENDEX ST-C5VA-WL500 Remote Unit
9 120VAC or 240VAC at 50 or 60Hz-12VDC/1.0A AC Adapter
9 VEXT-6 NTI 6 foot video cable with 15HD male on one end, 15HD female on the other end
9 SA-6-MM NTI 6 foot audio cable with 3.5mm stereo audio plugs on each end
9 2- Wall Mount Brackets
9 4- 4-40x1/4" Flat Head Screws
9 4- 6-32x1/2" Flat Head Screws
9 CD with a pdf file of this owner's manual
9 NTI Product Registration Card

Additional materials may need to be ordered, depending upon the configuration:

¾ CAT5/5e/6 unshielded twisted-pair cable(s) terminated with RJ45 connectors wired straight thru- pin 1 to pin 1, etc. (see pg.

10 for proper EIA/TIA 568 B wiring method)


Contact your nearest NTI distributor or NTI directly for all of your KVM needs at 800-RGB-TECH (800-742-8324) in US & Canada
or 330-562-7070 (Worldwide) or at our website at http://www.networktechinc.com and we will be happy to be of assistance.












Advertising