Network Technologies ST-C5VA-WL500 - Manual (Page 8)

NTI XTENDEX Wall Mount Extenders
5
Connect the CPU
1. Connect the VEXT-6 video cable (provided) to the male 15HD connector on the Local Unit labeled "VIDEO IN".
Connect the other end of the cable to the video port on the CPU (see Fig. 2).
2. Connect the SA-6-MM audio cable (provided) between the connector on the Local Unit labeled "AUDIO IN" and the
audio output jack on the CPU marked "line out", "spkr", or "headphones" (see Fig. 2).
Notes:
If all 3 jacks are available, use the jack marked "line out".
The "line out" jack is typically lime green and may be marked with this symbol
The "spkr" jack is typically orange, and may be marked with this symbol
The "headphones" jack may be marked with this symbol
Figure 2- Connect the Local Unit to the CPU
3.5mm Stereo Plug
VIDEO
AUDIO
OUT IN
IN OUT
AUDIO
VIDEO
NTI
R
www.nti1.com
XTENDEX VA
Local Unit
TM
12VDC
1A
ST-C5VA-WL500
Local Unit
(Front View)
VEXT-6
SA-6-MM
Audio Cable- SUPPLIED
Video Cable- SUPPLIED
15HD Female
Video Connector
15HD Male
Video Connector
15HD Male
Video Connector
3.5mm Stereo Jack
PS/2 CPU AUDIO CONNECTOR
line
out
ONE WILL BE MARKED "line
out" ,"spkr", "headphones"
OR WITH THIS SYMBOL