NISSAN ROGUE 2009 - Manual (Page 17)

Ⅲ Pull up or press down on the rear of the control lever
to raise or lower the rear
portion of the driver’s seat cushion.
RECLINING
Ⅲ Push the switch
forward to move the seatback forward; pull it back to move the
seatback backward.
LUMBAR SUPPORT (driver’s seat, if so equipped)
Ⅲ Push the adjusting lever/switch
repeatedly to adjust the lumbar support.
FOLDING THE FRONT PASSENGER SEAT DOWN (if so equipped)
To fold the front passenger’s seatback down for
extra storage length when transporting long items:
Ⅲ Lift up on the recline lever
, located on
the outside edge of the seat, and fold the
seatback forward as far as it will go.
Ⅲ Lift the front passenger’s seatback to an up-
right position to return the seatback to a seat-
ing position.
FOLDING THE REAR SEATBACK DOWN
To fold the rear seatbacks down, pull up on the release lever
located on the outer edge of the seatbacks and fold the seatback
forward.
HOMELINK
ா UNIVERSAL TRANSCEIVER (if so equipped)
SYSTEM OPERATING TIPS
Ⅲ Garage doors, electrical gates, entry doors, etc. will be activated during programming.
To avoid injury, make sure that people and objects are clear of all doors or gates during
programming. Your vehicle’s engine should be turned off while programming the
HomeLink
ா Transceiver.
Ⅲ To program your HomeLinkா Transceiver to operate a garage door, gate, or entry door
opener, home or office lighting, you need to be at the same location as the device.
15