56/64k csu/dsu wan interface card leds, Adsl wan interface card leds, Figure 10 – Nortel Networks Accelar 1050 User Manual

Page 31: Leds on the 56/64k csu/dsu wan interface card, Figure 11, Leds on the adsl wan interface card, Table 7

Advertising
background image

Chapter 1 Hardware overview 31

Nortel VPN Router Installation — VPN Router 1010/1050/1100

56/64K CSU/DSU WAN interface card LEDs

Figure 10

shows the LEDs on the 56/64K CSU/DSU WAN interface card.

Figure 10

LEDs on the 56/64K CSU/DSU WAN interface card

Table 7

describes the LEDs on the 56/64K CSU/DSU WAN interface card.

ADSL WAN interface card LEDs

Figure 11

shows the LEDs on the ADSL WAN interface card.

Figure 11

LEDs on the ADSL WAN interface card

Table 7

LED indicators on the 56/64K CSU/DSU WAN interface card

LED

Description

Blue

The blue alarm LED is lit when receiving an upstream failure

denoted by an alarm indication signal (AIS).

Red

The red alarm LED is lit when a loss-of-signal (LOS) or

out-of-frame (OOF) condition is detected on the receive signal.

Yellow

The yellow alarm LED is lit when the far-end equipment is in the

red alarm condition.

Green

The green LED is lit when the condition is normal operation.

56/64K

DDS

Blue LED

Yellow LED

Red LED

Green LED

CONN LED

RX/TX LED

ADSL

RX/TX

CONN

Advertising
This manual is related to the following products: