Nokia 230 T - Manual (Page 28)

GB 28
Navi Bars
Control folder
☛
Timer
General
You can make the Mediamaster to start and stop at a predefined
time.
The timer function is very useful when you want to record a pro-
gramme and you are unable to start/stop the recording event
yourself, or when you just want to be reminded of the start of a
programme you do not want to miss.
Note! The timer function only works when the receiver is in
standby.
Timer setup
• First, select Channel List with cursor left/right.
• Then, step to Channel to select the desired TV/Radio channel.
• Set the date using the numerical buttons on your remote con-
trol (yy/mm/dd).
• If you enter a wrong digit you can erase it with cursor left.
• Set the start and stop time using the numerical buttons on your
remote control.
The different start times may never overlap each other. If you try
to enter a start or stop time within an already occupied period of
time you will get a warning message about it.
• Press select to save or back to cancel.
• Press back twice to leave the Navi Bars and return to view-
ing mode.
• Press to put the Mediamaster in standby.
Up to 8 different events can be predefined. The events will be
sorted in start time order.
At each stop time the box will return to standby.
You can erase a predefined event by pressing cursor right.
• Press back to cancel the deletion and select to delete the
event.
Control folder
☛
System info
If you have to contact your service provider or a service centre,
they might ask for information available from this menu.
In the menu you find general information about which hardware
and software version your Mediamaster is running on.