New Holland Haybine 472 - Manual

New Holland
Haybine
®
Mower-Conditioner Specifications
472 488 499
Page 1 of 2
MODEL 472 488 499
CUTTERBAR WIDTH, ft. in. (mm) 7’3” (2210) 9’3” (2819) 12’3” (3734)
OVERALL WIDTH
Operating, ft. in. (mm)
11’11” (3632) 13’8-1⁄4” (4172) 19’8” (5994)
Transport, ft. in. (mm) 10’4-3⁄4”(3168) 12’2” (3708) 13’9” (4191)
OVERALL LENGTH
Operating, ft. in. (mm)
13’1” (3988) 13’4” (4064) 16’8” (5080)
Transport, ft. in. (mm) 13’1” (3988) 13’4” (4064) 21’6” (6553)
HEIGHT
Operating, ft. in. (mm)
3’5-3⁄4” (1060) 3’6” (1067) 6’2-1⁄2” (1892)
Raised, ft. in. (mm) 4’8” (1422) 5’7” (1702) 6’8-1⁄2” (2045)
WEIGHT, lbs. (kg) 2110 (957) 2763 (1253) 4480 (2032)
DRIVE 540 rpm PTO 540 rpm PTO 540 or 1000 rpm PTO
hydrostatic system
TRACTOR REQUIREMENT 30-hp (22.4 kw) or greater 35-hp (26.1 kw) or greater 60-hp (45 kw) or greater with
with standard ASAE hitch with standard ASAE hitch standard ASAE hitch and PTO
and PTO locations and PTO locations locations.
Two remote hydraulic systems
required capable of 1750 psi
(12066 kpa).
HEADER FLOTATION Full, lateral Full, lateral Full, lateral, independent
of conditioning rolls
HEADER LIFT
Guard points maximum lift, in. (mm)
18-1⁄2 (470) 19 (483) 19-1⁄2 (495)
REEL 4-tine bar 4-tine bar Rolareel
Peripheral speed, mph (kph) 6.2 to 8.2 (10.4 to 13.2) 6.5 to 8.6 (10.5 to 13.8) standard—4.8 to 7.9
(7.7 to 12.7) with reduction
kit—4.0 to 6.6 (6.5 to 10.7)
Diameter (maximum), ft. in. (mm) 3’6-1⁄4” (1073) 3’6-1⁄4” (1073) 3’7-1⁄2” (1105)
CUTTERBAR
Knives
Bolted, over-serrated Bolted, over-serrated Two opposing assemblies —
sections sections bolted over-serrated sections,
adjustable hold-downs
Guards Twin-forged steel, double- Twin-forged steel, double- Twin-forged steel, double-
hardened or stub guards hardened or stub guards hardened or stub guards
Cutting height, in. (mm) Adjustable from 1-1⁄4 to 4-1⁄4 Adjustable from 1-1⁄4 to 4-1⁄4 Adjustable from 1-1⁄4 to 6-1⁄4
(32 to 108) (32 to 108) (32 to 159)
SICKLE DRIVE wobble joint wobble joint enclosed gearbox
Speed, spm 1632 1632 1700
Stroke, in. (mm) 3 (76) 3 (76) 3 (76)