Electronically controlled cameras, Shooting – Nikon Coolpix S200 User Manual

Page 138

Advertising
background image

124

Troubleshooting

Te

chnica

l Note

s

Electronically Controlled Cameras

In extremely rare instances, unusual characters may appear in the monitor and the camera
may stop functioning. In most cases, this phenomenon is caused by a strong external static
charge. Turn the camera off, remove and replace the battery, and then turn the camera on
again. In the event of continued malfunction, contact your retailer or Nikon representative.
Note that disconnecting the power source as described above may result in the loss of any
data not recorded to internal memory or the memory card at the time the problem occurred.
Data already recorded will not be affected.

Shooting

Date not appearing on pictures

even when [Date imprint] is

enabled

Date does not appear on movies or on

pictures taken using P, N, F, [Contin-

uous], when [On] is selected for [BSS],

shooting in anti-shake mode, or [Auto] is

selected for [Electronic VR].

35, 38,

40,

42,58,

88, 90

Camera settings reset

Backup battery is exhausted; all settings

were restored to their default values.

104,

112

Problem

Cause/Solution

c

No picture taken when shutter-

release button is pressed

• When camera is in playback mode,

press i or the shutter-release but-

ton.

• When menus are displayed, press

m

.

• Battery is exhausted.

• When flash lamp blinks, flash is charg-

ing.

8, 24,

26

9

20

29

Camera cannot focus

• The intended subject is one with

which autofocus does not perform

well.

• Focus error. Turn camera off and then

on again.

25

11

Pictures are blurred

• Use flash.

• Use anti-shake mode.

• Use high-sensitivity shooting mode.

• Use electronic vibration reduction.

• Use A.

• Use tripod and self-timer.

28

42

33

92

90

30

Problem

Cause/Solution

c

Advertising
This manual is related to the following products: