NorthStar Navigation Explorer 710 VHF - Manual (Page 51)

51 Northtstar Explorer VHF Series: 710US, 710EU Operation and Installation Manual
Checklist (pictured over)
The following items should be supplied in the box. Check before starting the installation and contact your
dealer if an item is missing. Note that an antenna is not provided with the VHF Radio. Consult your Northstar
dealer for advice if necessary.
1. Mounting gimbal for the VHF radio
2. Power supply cable and external speaker connection cable
3. Two mounting knobs
4. Microphone bulkhead mount
5. GPS connection cable
6. Four self-tapping screws for the mounting gimbal
7. Four fl at screws for the mounting gimbal
8. Four plain washers for the mounting gimbal
9. Four spring washers for the mounting gimbal
10. Four nuts for the mounting gimbal
11. Two self-tapping screws for the microphone bulkhead mount
12. Two fl at screws for the microphone bulkhead mount
13. Two plain washers for the microphone bulkhead mount
14. Two spring washers for the microphone bulkhead mount
15. Two nuts for the microphone bulkhead mount.