Navini Networks Ripwave - Manual (Page 30)

Navini Networks, Inc. Ripwave MX Modem User Guide
Charging the
HD-EBP
are and
aintenance
eeds to be recharg attery is connected
M ur ed on but the LED on the back
of the dicating the battery has no power) or
is red (indicating the battery level is low).
To recharge the battery pack, use only the 12V charger that came
with the HD-EBP. Using any other charger can damage the battery.
To charge the HD-EBP, plug the 12V adapter into the 12V input
socket on the HD-EBP. Plug the other end of the adapter into an
electrical wall socket.
o the Modem
while it is connected to a
you years of trouble-free service.
o ensure on, read
instructio
Keep the Modem free of d isture. If th ets
wet, l to dry it i .
Handle the Modem gently. Dropping it or mishandling it can
cause damage to the plastic shell or the electronic circuitry.
Keep the Modem away from high temperatures. Heat can cause
damage to the plastic shell or the electronic circuitry.
C
M
The HD-EBP n ed when the b
to a odem and the Modem is t
battery remains off (in
n
Pig-tail
Note: Do not attempt to plug the 12V adapter int
as this may harm the Modem.
Note: The battery may charge
Modem.
our Modem is designed to give Y
T
operati
ns.
the following care and maintenance
ust and mo
mm tely
e g Modem
use a towe edia
Cord
12V Input Socket
Plugs into
Wall Socket
30
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)