Numark Industries CM 200 - Manual (Page 17)

17
SPECIFICATIONS
Inputs
Line:
10Kohm input impedance
77mV rms sensitivity for 1.22V output
Mic: 600 ohm input impedance unbalanced
1mv rms sensitivity for 1.22V output
70mV rms max input
Phono: 47Kohm input impedance
1.2mV rms sensitivity @1KHz for 1.22V output
Outputs
Line:
9V rms max
Headphone: 0.5W into 47 ohm
Distortion: less than 0.01%
Signal to Noise Ratio (maximum output) JIS-A weighted
Line:
Better than 98.dB
Mic: Better than 86dB
Phono: Better than 81dB
Frequencey Response
Line:
20Hz-20KHz ±0.5dB
Mic: 20Hz-15KHz ±0.5dB
Phono: ±1dB except for controlled attenuation of –3dB
@ 20Hz to reduce rumble and feedback
Channel Equalizer
DJ Mic Equalizer
Bass: +12/-32dB @60Hz Bass: ±10dB @100Hz
Middle: +12/-32dB @1.2KHz Treble: ±10dB @15KH
Treble: +10/-28dB @15KH
Power Consumption
11 Watt typical
14.7 Watt with full headphone output