NComputing L300 - Manual (Page 41)

L300/L230/L130 User Manual
41
logoff since the host is shutting down. Each user must save their work. Also, a window pops up on the
host that enables the administrator to abort the shutdown timer and start the shutdown immediately, or
cancel the shutdown. When the shutdown timer expires, the shutdown occurs.

Disable Send Broadcast Message: Displays whether or not the administrator has disabled broadcast
messages. See the description of the “Sessions” tree item for more information about how broadcast
messages work.

Disable Console in Context Menu: Displays whether or not the administrator has disabled the
Console Icon from showing up in the Windows system tray of a us er’s virtual desktop session.

Prevent access of the USB-storage devices to the attached device: Displays whether or not the
administrator has globally prevented access to USB devices on access devices.

Remote View/Control allowed: Displays whether or not the administrator has configured the vSpace
software to allow administrators to remotely view user and control user sessions.

Clean up disconnected sessions not in use: Displays whether the vSpace software automatically
looks for disconnected sessions that are not in use and logs them out after a defined period of time. If
this feature is turned off (set to “No” or “0”), when any access device drops its connection, the
connection remains active on the host. When the user reconnects, their disconnected session is
reconnected to their new session and all their open files and applications are available again. Also, in
this case, the only way to end a disconnected session is for an administrator to stop the session from
the console software. If this feature is turned on (set to any whole number up to 999), the same
behavior applies, but when a session is disconnected, a timer starts. If the user reconnects before the
timer is up, their disconnected session is reconnected to their new session and all their open files and
applications are available again. If the timer runs out and the session is still disconnected, the vSpace
software will end the session by itself. This makes sure that disconnected sessions do not reserve
resources for an indefinite period. By defau
lt, this is set to “5.”

Support WTSAPI32 Interface: Displays whether or not the vSpace software has turned on support for
the WTSAPI32 interface.

Disable background-bitmaps under Windows XP: Displays whether or not the user is able to set
their own background bitmap for their Windows desktop.

Do not display last user name: Displays whether or not the vSpace software displays the last user
name that logged on using a particular access device. This is sometimes enabled as a security
measure.

UTMA/UTSA USB port support: Displays whether the administrator has set the vSpace software to
allow using the USB port on L230 access devices.

Administrator Password: Displays whether an administrator password is set.

Autologon on the Host Station: Displays whether the host PC is set to boot up without the Windows
logon screen showing on the host PC.

Background Hardware Activation: Displays whether the software silently activates newly-connected
devices.

Video Streaming Support: Displays whether the host will provide streaming video to compatible
devices. (L300 only)

Accelerate Flash Globally: Displays whether the host will leverage video streaming to deliver high-
quality Flash to the access device at the cost of higher processor utilization.