NComputing L300 - Manual (Page 8)

L300/L230/L130 User Manual
8
System Requirements
Starting with L-series vSpace 6.5, the maximum number of users is increased to 100. However the number of
users, intended application suite and overall performance expectation will ultimately determine how powerful a
computer must be used in order to deliver the desired multi-user experience. The tables below give
recommended specifications for a vSpace host computer running a typical application set, based on the
number of users and type of access device. NComputing recommends you always test your environment in
advance of deployment to ensure it meets your expectations.
Recommended Host Hardware Configuration (L300)
Host Configurations
Number of Users
1
1-10 10-20 20-30 30-50 50-75 75-100
CPU*
(minimum or equivalent)
Intel™ Core
2 Quad
Intel Core ™
i7
Intel Core i7 Intel Core i7 Dual Xeon™ Dual Xeon
Memory (32-bit OS) 4 GB 4 GB 4 GB NA
2
NA
2
NA
2
Memory (64-bit OS) 6 GB 8 GB 12 GB 16 GB 24 GB 24 GB
1 The number of users that your installation will support depends upon the host's configuration and your end- users’
performance expectations. Performance results are highly dependent upon the individual host hardware, memory, applications
being used, OS and network conditions within any LAN. Host requirements will vary, please test your multi-user
environment before deployment.
2
32-bit operating systems are not supported with this number of users.
For additional sizing guidelines refer to the following Knowledge Base articles:

Scaling vSpace Deployments

Deployment Checklist .
For Microsoft OS licensing information see the paragraph on page 3 and www.ncomputing.com/mslicensing
For each L-series device you will need:

Keyboard and mouse (PS/2 for L130/L230 or USB for L300)

Monitor

A category 5/6 network cable to connect to your existing Ethernet network

Optional: speakers, headphones, microphones and USB peripherals