Navman SmartS iCN530 - Manual (Page 12)

12
iCN 530 | User Manual
G
et
tin
g
st
ar
te
d
3. Starting your iCN
Before you begin, check if your vehicle is fitted with a heat-reflective or heated windscreen. If so, you will
need to purchase an external antenna for your iCN to receive GPS signals.
Step One: Position the iCN in your Vehicle
Follow the safety notice on page 7 to ensure that the iCN does not obstruct the driver’s view, or
interfere with the operation of vehicle airbags and safety devices. Position the iCN in your vehicle
according to the instructions in your In-Car Installation Guide.
The Main Menu screen provides access to all of the iCN’s functions, including navigating to a
destination.
Step Two: Turn iCN On
1. If the Battery Switch is off (O), remove and use the stylus to switch it on ( | ).
2. Press

.
The iCN will turn on.
Step Three: Language Screen
When you switch your iCN on for the first time, the Language screen will display.
1. Tap your language choice.
• To prevent the Language screen from displaying on each startup, select the Do not show
on startup check box.
2. Tap to go to the next screen.
The Warning screen will display.