Nikon Coolpix L120 - Manual (Page 69)

57
Auto Mode
More on
Sh
ooting
Continuous
Change settings to Continuous or BSS (best shot selector).
The icon for the current setting is displayed in the monitor during shooting (
A 8).
When set to Single, no icon is displayed.
A (auto) M d (Shooting menu) M Continuous
U Single (default setting)
One image is captured each time shutter-release button is pressed.
V Continuous
While the shutter-release button is held all the way down, up to 19 images are
captured at a rate of about 0.7 frames per second (fps) when image mode is set to
R 4320×3240.
D BSS (Best Shot Selector)
The “best shot selector” is recommended when shooting with the flash off or the
camera zoomed in, or in other situations in which inadvertent motion can result in
blurred images.
The camera captures a series of up to ten images while the shutter-release button is
held all the way down, and the sharpest image in the series is automatically selected
and saved.
W Multi-shot 16
Each time the shutter-release button is pressed all the way
down, the camera shoots 16 images at a rate of about 22
frames per second (fps), then arranges them in a single image.
Images are captured with the image mode locked at
L (image size: 2560 × 1920 pixels).
• Digital zoom cannot be used.
B
Notes on Continuous Shooting
• When Continuous, BSS, or Multi-shot 16 is selected, flash is disabled. Focus, exposure, and
white balance are fixed at the values determined with the first image in each series.
• The frame rate with continuous shooting may vary, depending upon the current image mode
setting, the memory card used, and the shooting environment.
• This feature cannot be used simultaneously with certain features.
➝
“Camera Settings that Cannot
Be Set at the Same Time” ( A 60)
B
Note on BSS
BSS is best suited to shooting subjects that are not moving. When shooting moving subjects or
when the composition of the picture changes while shooting, the desired results may not be
achieved.