NordicTrack ViewPoint NTL14905.0 - Manual (Page 16)

16
Enter user information.
Highlight the words USER SETUP in the main
menu and then press the Enter button.
To enter your weight, first make sure that you
have identified yourself as User 1 or User 2 (see
step 3 on page 15). Next, highlight ENTER
WEIGHT and press the Enter button. Next, press
the up and down arrow buttons to enter your
weight. Then, press the Enter button.
To enter your age, first highlight ENTER AGE and
press the Enter button. Next, press the up and
down arrow buttons to enter your age. Then,
press the Enter button.
To reselect the main menu, highlight EXIT and
then press the Enter button.
Change console settings if desired.
Highlight the words TREADMILL SETUP in the
main menu and then press the Enter button.
The console can display information such as dis-
tance and weight using either the English system
or the metric system. To select the desired sys-
tem, first highlight DISPLAY UNITS and press the
Enter button. Then, highlight ENGLISH or MET-
RIC and press the Enter button.
When a Walk, Jog, Run, or Custom program is
selected, a graph of the speed settings of the pro-
gram will appear in the display. The display can
also show a graph of the incline settings of the
program. Highlight INCLINE GRAPHS and press
the Enter button. Then, highlight NO or YES and
press the Enter button.
The console also features a “demo mode” that can
be used while the treadmill is displayed in a store.
While the demo mode is selected, the power cord
can be plugged in, the key can be removed from
the console, and the display and the television will
remain on. The console buttons will not function.
Highlight DEMO MODE and then press the Enter
button. Next, highlight OFF (to turn off the demo
mode), LOGO (to display a logo), ROAD (to dis-
play an animation of a runner on a road), or PRO-
GRAMS (to display previews of various programs).
Then, press the Enter button.
To reselect the main menu, highlight EXIT and
then press the Enter button.
HOW TO USE THE MANUAL MODE
Insert the key into the console.
See HOW TO TURN ON THE POWER on page
15.
Use the main menu to enter or change settings
if desired.
See HOW TO USE THE MAIN MENU on page 15.
Select the manual mode.
Each time the key is inserted, the manual mode
will be selected. If you have selected a program,
press any of the program buttons repeatedly until
the words MANUAL MODE appear in the display.
Start the walking belt and adjust the speed.
To start the walking belt, press the Start button,
the Speed increase button, or one of the twelve
buttons on the right side of the console.
If the Start button or the Speed increase button is
pressed, the walking belt will begin to move at 1
mph. As you exercise, change the speed of the
walking belt as desired by pressing the Speed in-
crease and decrease buttons. Each time a button
is pressed, the speed setting will change by 0.1
mph; if a button is held down, the speed setting
will change in increments of 0.5 mph. If one of the
twelve buttons on the right side of the console is
pressed, the walking belt will gradually increase in
speed until it reaches the selected speed setting.
To stop the walking belt, press the Stop button. To
restart the walking belt, press the Start button, the
Speed increase button, or one of the twelve but-
tons on the right side of the console.
4
3
2
1
5
4