Nortel Networks 1220 - Manual (Page 121)

Operating your IP Phone 1220
121
Viewing active conferees
Use the following procedure to view active conferees.
Disconnecting a conferee
Use the following procedure to disconnect a conferee.
1. During a conference call, press the
Confdsp key to turn on the LCD
indicator. Each key press changes the
screen to show a different active
conferee.
This action has no effect on the display
of other IP Phones involved in the
conference.
2. Press the Goodbye key.
If configured, the Conference Count
Display returns an updated count of
conferees. The LCD indicator turns off.
1. During a conference call, press the
Confdsp key until the conferee to
disconnect appears on the screen.
2. Press the DN key on which the
conference call is established.
ConfDsp
(Goodbye)
ConfDsp