Nortel Networks NP-4046-100 - Manual (Page 3)

Page 3
A handset user guide is supplied with each Symbol ® NetVision handset which describes, in detail,
how to use the buttons on the handset, including any data-related buttons found on the NetVision
Data phone. Note: The buttons described here are not located in the same place on all models.
You must be logged into the network:
The handset display shown below is from the NetVision handset. If you have a NetVision data
telephone or a new version of the handset, the shape of the display may have a different
appearance, however, the icons on all handsets indicate the same thing:
Logging in: Logging out:
Press to turn the handset on.
Press and hold to turn the handset off.
Enter your PIN number, and press .
Make call: Enter number and press . Answer Call: Press .
If you pressed to silence a ringing call, to
retrieve the call, press or
choose Off-hook, if it is programmed into
the menu.
Note: This sequence also produces a dial tone
on an idle telephone.
End call or feature: Press .
To Hold or Unhold a call, or to toggle
between two calls: Press .
To Hold the call and drop the link so someone
else can pick it up, press .
To recover a held call from a dropped link,
press: .
Logging into and out of the network
SND SND END END
SND SND
Quick start hints
SND SND SND SND
END END
< SND SND
FCT
END END
HOLD HOLD
HOLD HOLD END END
< SND SND
HOLD HOLD
Active handset display
NAME
XXX-XXXX
Radio signal strength indicator
Active line indicator
Battery strength
indicator
Call information
Idle/alert icon
active call icon
NetVision quick start call basics